Joint Replacement & Revision Treatment
Joint Replacement & Revision Treatment
Revision is not one operation but a family of them, arranged in order of scale — from exchanging a plastic liner through a single-stage reconstruction to a staged campaign against infection that takes more than one operation. Which operation applies is decided by the assessment, not by preference: the component involved, whether it is loose, whether infection is present, and how much bone remains. This page walks the family in order, and at each level says what the operation changes, what it does not, and what recovery asks.
First, the baseline: what a primary replacement involves
Understanding revision is easier with the primary operation in view. A replacement removes the worn surfaces and caps the bone with engineered components: at the hip, a stem in the femur carrying a ball that articulates with a cup fixed in the pelvis; at the knee, shaped metal caps on femur and tibia with a plastic cushion between them. The components are fixed with cement or by a surface the bone grows onto, and the bearing between the moving parts is chosen for decades of low wear — today usually ceramic or highly cross-linked plastic, combinations that registry data shows performing best over the long term.
When a replacement is itself the treatment being considered — rather than the problem — the decision belongs to the disease guides: replacement for hip and knee osteoarthritis and replacement after collapse in avascular necrosis. This page takes over where those leave off: the joint already has an implant, and the implant has a problem.
How a revision is planned
Revision succeeds or fails in the planning, because the operation is performed against bone that previous surgery has altered. The assessment images are converted into a component plan: which parts will be removed, what remains to fix new components to, and which implants, augments or grafts must be available on the day. Our centres use robotic-assisted planning for knee and hip replacement to define implant position before surgery rather than estimating it in theatre, and 3D-printed planning models — from the orthopaedic 3D printing centre established with the Shanghai Ninth People's Hospital team — let the anatomy be rehearsed in advance. For complex bone loss, patient-specific augments and custom components can be printed to fit what remains, rather than forcing what remains to fit standard parts.
Two further pieces of planning matter to the patient directly. The first is the implant inventory: revision surgery needs a wider range of components than primary surgery, and a centre that keeps them removes the risk of improvising mid-operation. The second is the staged plan: where more than one operation is foreseeable, the sequence, the interval and the criteria for moving between stages are written down before the first one begins.
Procedures short of full revision
Not every failing part requires the whole implant to go. Head and liner exchange — replacing the ball and the plastic insert while leaving well-fixed stems and cups in place — answers isolated bearing wear and some instability problems through the original scar, with a recovery close to the primary operation's. A dislocation is first treated by reduction and review of why it happened; where instability recurs, changing the liner for a more constraining design, or adjusting the position of the ball, can settle the joint without rebuilding it. Washout with component exchange treats the early, acute infection within the first weeks, when the organisms are still on the surface rather than established in bone.
The discipline in this section is knowing where its ceiling is: a minor procedure performed for a major problem fails expensively. That judgement — minor versus full revision — is one of the four answers the assessment exists to provide, and it is made from the imaging and the aspiration results rather than from the wound's appearance.
One-stage revision for aseptic loosening
Aseptic loosening — the implant's bond to bone failing without infection — is the classic indication for a full revision, and the operation is a single-stage reconstruction: the loose components are removed, the bone beds are prepared, and new components are fixed, with augments or graft where bone has been lost. Because the joint is sterile, everything happens in one anaesthetic, and the recovery is a longer version of the primary operation's.
Two things are worth understanding about this operation. First, sterility is established before surgery, not assumed during it: the blood markers and aspiration that declared the joint uninfected are what make the one-stage approach safe, which is why the assessment sequence matters. Second, the operation replaces the component, not the time: a revised implant carries a lifespan like any other, and part of the pre-operative conversation is an honest account of what the second implant is expected to deliver for this patient's remaining years and activity.
Revision for infection: why it is staged
Established infection around an implant is treated differently from every other cause of failure, because the organisms live on the implant surface where antibiotics reach poorly and the body's defences reach worse. The standard answer is the two-stage revision: in the first operation, all components are removed, the infected tissue is debrided, and a spacer — a temporary, antibiotic-loaded block that holds the space and delivers high local doses of the drugs — is placed. After a period of targeted antibiotics, with the blood markers followed as evidence, a second operation replaces the spacer with the new components.
This is the longest road in joint surgery — two operations, an interval measured in weeks to months, and a genuine risk that the infection needs a third procedure — and its acceptance is what makes the strict pre-operative assessment worth the discipline: the criteria for calling infection are deliberately strict in both directions, so that patients are neither put through a staged reconstruction for a sterile joint, nor given a one-stage replacement into a joint that was quietly infected. For patients travelling for this treatment, the two operations and the interval are planned as one episode of care before the journey begins, with the interim coordinated rather than left to chance.
Periprosthetic fracture: fix or revise, according to what is fixed
A fall can break the bone around a sound implant, and the treatment question is decided by one finding: is the implant itself still fixed to bone? Where it is, the fracture is fixed — plates, screws, wires or a strut of donor bone around the component — and the implant continues its life. Where the fracture loosens the implant, or passes through the bone the implant depends on, fixation alone will fail, and the operation becomes a revision: the component is replaced together with the fracture's reconstruction. The fracture's position — which zone of which bone — determines which of these roads applies, and a frail or osteoporotic bone changes the calculus further.
Recovery follows the fracture as much as the joint: weight-bearing is protected until the bone consolidates, and the rehabilitation milestones are set by healing rather than by the implant. This is also the failure mode that prevention page's advice about bone health and falls exists for — the most effective treatment of a periprosthetic fracture is the one that prevents it.
Bone stock: grafts, augments and custom components
The raw material of revision surgery is bone, and each previous operation spends some of it. Where bone loss is modest, standard components with metal augments — wedges and blocks that rebuild the defect — restore the platform. Where it is larger, bone graft, metal cones or cages that bridge the defect, or 3D-printed custom components matched to the patient's anatomy are used. This is the part of revision surgery where planning capability is most visible: the reconstruction is designed from the CT before the operation, and the pieces are in theatre because they were known to be needed.
Patients should understand what this means for expectations: bone-stock reconstruction makes revision possible where it once was not, but a complex reconstruction recovers more slowly than a straightforward one, and the post-operative plan reflects that rather than promising the primary operation's timetable.
Recovery after revision surgery
Revision recovery is longer than primary recovery — how much longer depends on the operation's scale, from "close to the original" after a liner exchange to "measured in months" after a staged infection reconstruction. The structure is the same throughout: an enhanced-recovery pathway with regional anaesthesia where suitable, standing on the day of surgery where the operation allows, and nine standardised rehabilitation stages through which progress is measured. Discharge follows a milestone list rather than a calendar date: safe walking with aids, the wound stable, the exercises independent, clot prevention arranged.
What patients can influence, they are asked to: pre-operative strength work where time allows, adherence to the weight-bearing instructions, and reporting new problems early rather than at the next appointment. What they cannot — the bone they were born with, the operations they have already had — the surgical plan has already taken into account. The honest framing: revision asks for more patience than the first operation did, and it usually delivers the same destination.
Warning signs after any revision
Four findings after surgery are not for the next appointment: fever with a painful joint, discharge from the wound, the joint dislocating, and calf pain, swelling or heat in one leg, or sudden breathlessness and chest pain. The first two are assessed the same week because infection is easier to treat early; the third needs the joint put back; the fourth belongs to clot prevention and is an emergency anywhere. Everything else that worries a patient — stiffness that is improving slowly, aching that follows activity, clicking without pain — belongs to the follow-up schedule, and most of it settles on it.